Characteristics of steel
MC delivery status designation means TM production technology – Thermomechanical rolling + ACC rapid controlled cooling together with the concept of microalloying and low carbon content creates a fine grain structure.
Heat treatment above 580 °C is not permitted and would result in a reduction of the minimum yield strength.
These steel grades also meet all the requirements of comparable steels according to EN 10149-2.
Suitability of steel use
Very good suitability for cold forming, for profiling, punching. Very good weldability due to low carbon equivalent. Application in engineering, for the production of lightweight constructions with a requirement for higher strength. Frames of trucks and agricultural machines, cranes, excavators, etc.
Chemical composition of steel
| Jakost oceli | C | Mn | Si | Al | Nb | Ti | P | S |
|---|---|---|---|---|---|---|---|---|
| DIN / EN S355MC | 0,12 max. | 1,30 max. | 0,50 max. | 0,015 max. | 0,09 max. | 0,15 max. | 0,025 max. | 0,015 max. |
Steel hardness
| REH [Mpa] | Rm [Mpa] | [%] | Nárazová práce [KV]+ [J] min. při | ||||
|---|---|---|---|---|---|---|---|
| Jmenovitá tl. mm | Mez kluzu | Pevnost | Taž.A | -20 [ºC] | 0 [ºC] | +20 [ºC] | Stav dodání |
| 3-15 | min. 355 | 430-550 | 19 | 40 | - | - | MC |
Supply options
Choose from a range of steels. Other dimensions on request, from central stock or new production.
Sheet – Coil shape
Hot rolled, For cold forming.
| W.nr | 1.0976 |
|---|---|
| ČSN | - |
| DIN-EN | S355MC |
| Stav dodání | MC |